MaxStream 9XTend-PKG-E Manuel Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 62
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
9XTendPKGE™EthernetRFModemProductManualv2.x4x[2007.01.04]
©2007MaxStream,Inc.,Confidential&Proprietary‐AllRightsReserved 7
2.SystemSetup
2.1. Data Radio System Components
MaxStream RF Modems were designed to provide reliable wireless links between devices contained
in a data system. The PKG-E Ethernet RF Modem allows integrators to connect the MaxStream
Modems into an Ethernet network.
The following devices will be used to describe a data system that includes the XTend-PKG-E Ether-
net RF Modem:
XTend-PKG-E Ethernet RF Modem ("PKG-E"): The Ethernet RF Modem is
an Ethernet-connected serial modem used for communication with other Max-
Stream serial modems. The Ethernet RF Modem is not a wireless Ethernet
Bridge intended for Ethernet connectivity on both the remote and base ends of
a wireless link.
XTend-PKG-R RS-232/485 RF Modem ("PKG-R"): The RS-232/485 RF
Modem is a serial modem that can be identified by its DB-9 serial port and 6-
switch DIP Switch.
XTend OEM RF Module ("OEM RF Module"): The OEM RF Module is
mounted inside all XTend-PKG RF Modems and may be integrated into OEM-
designed products to transmit and receive data over-the-air.
2.1.1. System Description
The PKG-E Ethernet RF Modem can be used as an access point in a network of MaxStream RS-
232/RS-485 RF Modems (or other OEM RF Module Embedded Devices). XTend RF Modems support
point-to-point, peer-to-peer, point-to-multipoint and multidrop network topologies. Below is an
example of a typical point-to-multipoint application:
Figure201. XTendPKGEEthernetRFModeminaPointtoMultipointDataRadioSystem
The Ethernet-connected RF modem supports com port and Telnet connection options:
• "Com Port Redirector Software enables legacy serial applications to communicate with the
Ethernet RF Modem by forwarding serial data over Ethernet.
• "Telnet communicates directly to the Ethernet RF Modem using port 14001. Refer to the "Test
Communications (Telnet Loopback)" section [p12] for an example that by-passes the com
port.
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 61 62

Commentaires sur ces manuels

Pas de commentaire