MaxStream XStream-PKG-R RS-485 Manuel d'utilisateur télécharger pdf

Radio1

XStream-PKG-R

Radio2

XStream-PKG-R

Figure 1. Hardware Setup

Hardware Setup (for range test)

Requirements for Range Test

One computer (Windows 98 SE, 2000 or XP) with an available RS-232 (DB-9)

serial com port

X-CTU Software - MaxStream-provided software that can be used to:

• Setup PC serial com ports to communicate with XStream RF Modems

• Test XStream RF Modem range

• Configure XStream RF Modem parameters

Hardware Setup steps-to-follow

Install X-CTU Software steps-to-follow

The XStream-PKG-R™ RS-232/485 RF Modem

Quick Start Guide

Hardware Setup

Range Test

Advanced Modem Configuration (optional)

Tips and Suggestions

1. Set both DIP Switches to RS-232 Mode. Switch 1 is up (on) and the

remaining five switches are off (down) [see Figure 5].

2. Connect Radio1 to a PC using an RS-232 cable (included with XStream

RF Modem part numbers that end with an "-RA" suffix).

3. Attach the serial loopback adapter to the DB-9 serial port of

Radio2. (The serial loopback adapter configures Radio2 to function as a

repeater by looping data back into the modem for retransmission.)

4. Attach RPSMA antennas to Radio1 & Radio2.

5. Power Radio1 & Radio2 through their power connectors.

Double-click the "setup_X-CTU

.exe

" file and follow prompts of the installation

screens. This file is located in the 'software' folder of the MaxStream CD and under

the 'Downloads' section of the following web page: www.maxstream.net/helpdesk/

serial loopback adapter

MD0008

Create Long Range Wireless Link in Minutes!

1 2 3 4

Résumé du contenu

Page 1 - Quick Start Guide

Radio1XStream-PKG-RRadio2XStream-PKG-RFigure 1. Hardware SetupHardware Setup (for range test)Requirements for Range TestOne computer (Windows 98 SE, 2

Page 2 - Range Test

1. Launch the X-CTU Software: (Start --> Programs --> MaxStream --> X-CTU) Under the "PC Settings" tab [Figure 2], select the PC s

Page 3 - Baud Rate dropdown list

1. Setup connection to a PC by following steps 1,2 & 5 of the "Hardware Setup" steps-to-follow [page 1].2. Select the PC com port baud

Page 4 - Tips and Suggestions

The XStream-PKG-R DIP Switch allows users to configure "Serial Interface", "Termination" and "Parity" command parameter

Plus de documents pour Mise en réseau MaxStream XStream-PKG-R RS-485

Voir le document MaxStream XStream-PKG-R RS-485 Manuel

MaxStream XStream-PKG-R RS-485 Manuel (45 pages)

Commentaires sur ces manuels

Pas de commentaire

MaxStream XStream-PKG-R RS-485 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Mise en réseau MaxStream XStream-PKG-R RS-485. Quick Start Guide: XStream PKG [en] Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Mise en réseau MaxStream XStream-PKG-R RS-485

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau MaxStream XStream-PKG-R RS-485