MaxStream 9XTend-PKG-E Guide d'installation télécharger pdf (Page 9)

XTEND 900 MHZ WIRELESS MODEM

For use with VEEDER-ROOT EMR³ DATALINK

INSTALLATION INSTRUCTIONS

Manual 577013-859, Rev. B

Veeder - Root

Page 9 of 13

Click on the “+” of Ports and you will find the MaxStream USB Modem Communication Port.

Note: If there is no MaxSteam Port, then the Drivers for the MaxStream Modem have not

been loaded. Plug the MaxStream USB Modem into your computer and follow the Plug-

and-Play instructions, or got to Add Hardware on the Control Panel.

For use with the DataLink Software, refer to the Quick Help Guide 577013-860.

High Gain Antenna - Kit 0846000-033

If a high gain antenna is used, it should be located as high as possible. Instead of additional

co-axial cable being added to locate the antenna, a longer USB cable can be added between

the computer and the modem.

When you click on the “+” of

Ports, you will find the

MaxStream PKG-U Modem and

the computer assigned Com port

- In this example “6”

This Communication Port

Number will be entered on the

Configuration page of the

DataLink program.

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

MaxStream 9XTend-PKG-E Guide d'installation Page 9